What You Are About to Read

This is not a generic supplier profile. This is a direct, honest answer to the question every Lagos contractor, developer and project manager eventually asks: where can I consistently get the right iron rods — full gauge, on time, at a fair price — without being misled? Read every section. The answer is here.

Lagos has hundreds of iron rod sellers. Markets in Ajah, Igando, Alaba, Ojota, Orile — rods are everywhere. So why do experienced contractors still end up with under-gauge material? Why do project managers still face delivery delays that push casting dates back by weeks? Why do developers still discover, mid-project, that the rods already in their columns are not the size or grade they ordered?

Because buying iron rods in Lagos is not simply about finding a seller. It is about finding a supplier you can trust with your structure. A building does not collapse because of a bad paint job. It collapses because something structural failed. The iron rod — the reinforcement inside your concrete — is that structural element. Getting it wrong is not a procurement mistake. It is a safety mistake.

What Full-Gauge Iron Rods Actually Mean

Every TMT iron rod has a theoretical weight per metre based on its diameter. A 12mm rod should weigh 0.888kg per metre — meaning a standard 12-metre bar should weigh exactly 10.66kg. This is not a suggestion. It is a structural specification derived from the cross-sectional area of steel that your engineer calculated when designing your structure.

Under-gauge rods are manufactured to look like the right size but weigh significantly less. The ribs — the ridges on the rod surface — are there, giving the visual impression of a full-gauge bar. But the core cross-section is smaller. Less steel. Less strength. The difference of 0.5kg per bar across a full project is not a small variance. On a 10-tonne order of 12mm rods, that is approximately 470kg of steel you paid for and did not receive — steel that was supposed to be inside your structure.

⚠️ The Lagos Under-Gauge Problem Is Real

The iron rod market in Lagos has a documented under-gauge problem. Many sellers — not all, but many — supply rods that look correct but weigh below specification. The buyer cannot tell by looking. They can only tell by weighing. Most buyers never weigh. Most buyers discover the problem only when something goes wrong. By then, the concrete has already been cast around substandard steel.

Why Where You Buy Matters More Than the Price

Every Lagos contractor has received a price quote that seems attractive — ₦20,000 to ₦40,000 cheaper per ton than the market. And most have learned, usually once, why that price was lower. The discount was the steel. Thinner bars. Shorter lengths. More bars per ton than specification allows. The saving on purchase price was real. The cost in structural integrity was permanent.

A supplier who consistently delivers full-gauge rods, standard 12-metre lengths and the correct number of bars per ton is not giving you a favour. They are giving you what you paid for. What is extraordinary is how rare this is in the Lagos construction materials market — and how valuable it becomes when you find it.

⚖️
Full Gauge Every Time
Every Raloyd delivery is verifiable on arrival. Weigh it. Measure it. Count it. We encourage verification before you sign.
📋
Test Certificates Available
Laboratory test certificates available on request for Fe 500 grade materials. Documentation you can show your engineer and your client.
🚚
Delivery Coordination
We coordinate delivery directly to your site across all Lagos and interstate locations. Not "delivered to the road" — delivered to your site.
5.0 Google Rating
16 verified client reviews. Not self-reported. Not manufactured. Real clients who ordered real material and took the time to verify and rate the experience.

Iron Rod Sizes Available at Raloyd — Full Range

Raloyd supplies all standard TMT reinforcement rod sizes used in Lagos construction. Every size is full gauge, standard 12-metre length, supplied from stock at both our Ajah and Igando locations.

SizeGradeBars per TonPrimary UseAvailability
8mm TMTFe 500≈ 210Light reinforcement, stirrups, distribution barsIn stock
10mm TMTFe 500≈ 133Slab mesh, light columns, residential beamsIn stock
12mm TMTFe 500≈ 93Columns, beams, suspended slabs — most used sizeIn stock
16mm TMTFe 500≈ 52Heavy columns, transfer beams, commercial structuresIn stock
20mm TMTFe 500≈ 33Large columns, raft foundations, heavy industrialIn stock
25mm TMTFe 500≈ 21High-rise cores, bridge decks, heavy civil worksIn stock

Current Supply Tiers — Every Quantity Served

Raloyd does not have a minimum order. Whether you need 1 ton for a small project or 100 tons for an estate development, the same quality standard and verification process applies to every delivery.

Three Supply Tiers

Any Quantity — Standard pricing. Any Lagos location. Same-day response. Full gauge. Verified delivery.

10 Tons and Above — Discount pricing applies. Quantity-based preferential rate. Same quality guarantee.

40 Tons and Above — Factory direct pricing. Lowest available rate in Lagos. Coordinated logistics. Test certificates included.

Two Strategic Locations Across Lagos

Raloyd operates from two locations positioned to serve projects across all of Lagos — both Island and Mainland, with interstate supply capability.

Ajah Office — Serving Lagos Island Corridor

KLM 22, Lekki-Epe Expressway, Abraham Adesanya Area, Ajah, Lagos. Strategically located to serve Lekki, Ajah, Sangotedo, Ibeju-Lekki, Epe and all corridor developments. The fastest route to Island construction projects.

Igando Office — Serving Lagos Mainland

Shop 8 & 9, Ire Akari Iron Market, Igando, Lagos. Located within the Ire Akari Iron Market — Lagos's established iron market hub — serving Igando, Ikotun, Isolo, Ojo, Festac, Amuwo-Odofin and all mainland corridor projects.

300+
Professionals Served
30+
International Clients
5.0★
Google Rating
2
Lagos Locations

Additional Construction Materials — One Supplier, Everything You Need

Raloyd does not only supply TMT rods. We stock the complete range of construction materials needed alongside reinforcement, so you can coordinate a single delivery for your entire casting requirements:

Get Current Pricing — Respond in Minutes

Send your rod sizes, quantities and delivery location on WhatsApp. We respond with current pricing and availability immediately — not tomorrow, not after a follow-up call. Now.

🎁 First-time buyer? Order 3 tons or more and receive 1 free binding wire roll.

Frequently Asked Questions

Where can I buy iron rods in Lagos?
Raloyd Trades and Resources Partners Limited supplies full-gauge TMT iron rods from two Lagos locations — Ajah on the Lekki-Epe Expressway (serving the Island corridor) and Igando at Ire Akari Iron Market (serving the Mainland). Contact +2348082134079 on WhatsApp for current pricing and availability.
What sizes of iron rods does Raloyd supply?
Raloyd supplies all standard TMT rod sizes: 8mm, 10mm, 12mm, 16mm, 20mm and 25mm. All are full gauge, standard 12-metre length, and available for any quantity from both Lagos locations.
How do I know if iron rods are full gauge?
Weigh 3-5 sample bars on delivery. A 12mm rod weighs 10.66kg, 16mm weighs 18.93kg, 10mm weighs 7.40kg. If bars weigh significantly less, they are under-gauge. Also count the bars — significantly more bars than the standard per-ton count is a red flag.
Does Raloyd deliver iron rods to site?
Yes. Raloyd coordinates delivery directly to construction sites across all Lagos locations and interstate. Delivery logistics are coordinated with your site team for convenient offloading.
What is the minimum order for iron rods at Raloyd?
There is no minimum order. Raloyd supplies any quantity to any Lagos location. Discount pricing applies from 10 tons, and factory-direct pricing applies from 40 tons.
Are test certificates available for rods from Raloyd?
Yes. Laboratory test certificates are available on request for Fe 500 grade TMT rods supplied by Raloyd. Contact us on WhatsApp to arrange documentation with your order.